Sri Plastic Enterprises ( A Unit of Sri Electronics and Embedded Solutions )

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Industrial control Enclosure  IP-65-12 - 100*100*70 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-345-IP-65-12
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Box Enclosures IP-65-10 -250*250*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-343-IP-65-10
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Industrial control Enclosure - IP-65-11 - 70*70*50 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-344-IP-65-11
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-01 -175*100*60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-350-IP-65-16
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is IP-65 Enclosures IP-65-23 - 300*250*150 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-364-IP-65-23
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Flame Proof Junction boxes - IP-65-01  -100*100*60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·  

·        Etc..,

Additional Information:

• Item Code: SPE-334-IP-65-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-01 -300*200*125 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-342-IP-65-09
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Box Enclosures   IP-65-24 -  200*150*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-366-IP-65-24
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Flame Proof Junction boxes - IP-65-02  - 100*100*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 encosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,
Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-335-IP-65-02
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is solar acdb box - IP-65-03 -175*100*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-336-IP-65-03
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is solar acdb box - IP-65-03 -175*100*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-337-IP-65-04
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Junction Box  - - IP-65-05  -190*140*70 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-338-IP-65-05
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-01 -250*160*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-339-IP-65-06
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Ip65 Waterproof Plastic Enclosure  - IP-65-07  -  90*90*60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-340-IP-65-07
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-01 -160*120*70 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-341-IP-65-08
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-01 -125*125*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-346-IP-65-14
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Enclosures - IP-65-14 TR -125*125*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-347-IP-65-14-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Cabinets - IP-65-15 -105*105*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-348-IP-65-15
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Cabinets - IP-65-15 TR -105*105*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-349-IP-65-15-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Polycarbonate Enclosure  IP-65-16 TR - 175*100*60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-351-IP-65-16-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is waterproof Boxes  IP-65-17 - 175*100*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-352-IP-65-17
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is weatherproof Boxes  IP-65-17 TR - 175*100*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-353-IP-65-17-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Solar DCDC Boxes  IP-65-18 - 160*160*85 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-354-IP-65-18
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Solar DCDC Boxes  IP-65-18 TR -  160*160*85 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-355-IP-65-18-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Solar ACDB Boxes  IP-65-19  - 200*150*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-356-IP-65-19
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Enclosure  IP-65-19 TR - 200*150*80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-357-IP-65-19-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Waterproof Enclosure  IP-65-20  - 270*180*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-358-IP-65-20
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Ip65 Waterproof Plastic Enclosure  IP-65-20 TR - 270*180*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-359-IP-65-20-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Polycarbonate Enclosure IP-65-21 - 300*300*150 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-360-IP-65-21
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Ip65 Waterproof Plastic Enclosure IP-65-21 TR - 300*300*150 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-361-IP-65-21-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Flame Proof Junction boxes IP-65-22 - 300*250*105 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-362-IP-65-22
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is Industrial control Enclosure  IP-65-22 TR - 300*250*105 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-363-IP-65-22-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is waterproof Boxes   IP-65-23 TR - 300*250*150 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-365-IP-65-23-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is weatherproof Boxes   IP-65-24 TR - 200*150*100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        LED Light Housings,

·        Etc..,

Additional Information:

• Item Code: SPE-367-IP-65-24-01
• Production Capacity: 1000 nos
• Delivery Time: 3-4 days
• Packaging Details: CARTOON BOXES