Sri Electronics And Embedded Solutions

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS this enclosure is New Industrial Water Proof Enclosure IP-65-06TR

250X160X100MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension 250X160X100MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE OR IVORY
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·       Electronics Products Housings,

·       Electrical Products Housings

·       Water level controllers Housings,

·       LED Drivers Housings,

·       General Purpose Housings,

·       Stabilizer Housings,

·       Electronic Choke Housings,

·       Motor Starter Housings,

·       Water Proof Housings(IP-65),

·       Junction Box Housings,

·       Mantra Housings,

·       AC/DC Adapter Housings,

·       Power Supply Housings,

·       LED Light Housings,

·       Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS this enclosure is  New Industrial Water Proof Enclosure IP-65-01 - 100X100X60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 100X100X60 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-03 -175X100X80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 175X100X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-17TR -175X100X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 175X100X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-18 -160X160X85 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension :160X160X85 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-10 -250X250X100 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 250X250X100 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-19 -200X150X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 200X150X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-16TR -175X100X60 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 175X100X60 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS this enclosure is New Industrial Water Proof Enclosure IP-65-02 -100X100X80MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension 100X100X80MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE OR IVORY
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·       Electronics Products Housings,

·       Electrical Products Housings

·       Water level controllers Housings,

·       LED Drivers Housings,

·       General Purpose Housings,

·       Stabilizer Housings,

·       Electronic Choke Housings,

·       Motor Starter Housings,

·       Water Proof Housings(IP-65),

·       Junction Box Housings,

·       Mantra Housings,

·       AC/DC Adapter Housings,

·       Power Supply Housings,

·       LED Light Housings,

·       Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-14 TR -125X125X80 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 125X125X80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-15TR -105X105X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 105X105X80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-20 -270X180X100 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 270X180X100 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-15 -105X105X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 105X105X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-14 -125X125X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 125X125X80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-12 -100X100X70 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 100X100X70 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-21 -300X300X150 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 300X300X150 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-16 -175X100X60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension :175X100X60 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-20TR-270X180X100 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 270X180X100 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-17 -175X100X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 175X100X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-19 -200X150X80 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension :200X150X80 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-08 -160X120X70 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 160X120X70 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-18 -160X160X85 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 160X160X85 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-11 -70X70X50 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 70X70X50 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-21TR -300X300X150 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 300X300X150 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-07 -90X90X60 MM(L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension :90X90X60 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-19(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-331/332
• DIMESIONS (OUTER): Size in mm :200 x 150 x 80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-04 -150X150X70 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 150X150X70 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

IP65 Waterproof enclosure is perfect for your electronic project housing needs. Made from high quality ABS enclosure is New Industrial Water Proof Enclosure IP-65-05 -190X140X70 MM (L*B*H) . Perfect for housing large sized electronic PCBs and boards. This box comes uses a rugged design and professional finish.

This box comes with a transparent lid. Useful if you have light indications on your PCB and use them for debugging. We also have this enclosure with an opaque cream lid.

This plastic box comes with plastic bosses on the inside for easy installation of PCBs and Circuit Boards. The lid secures onto the box from the top through high quality brass inserts. This ensures perfect fitting and long life.

Our IP65 enclosures offer complete protection against particles and a good level of protection against water. 

This IP65 Waterproof Enclosure offers -

• Suitable for Industrial and Outdoor Environments
• Complete protection from dust, oil, and other non-corrosive material.
• Complete protection from contact with enclosed equipment
• Protection from water projected by a nozzle against enclosure from any direction
• Offers better protection from dust and water compared to IP30, IP34, IP42, IP54, IP55 rated enclosures
• You can use our cable glands(sold separately on our website) to secure the cable and make a IP65 rated cable opening. Also makes servicing the wiring simple and easy.

Features:

• Outer Dimension : 190X140X70 MM (L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• Colour: WHITE
• The enclosure consists of a bottom box and a lid which clips onto to each other and can be secured through 4 screws(included in package).
• Comes with pre fit one piece high quality silicone gasket (installed) to provide better waterproof protection.
• Multiple board standoffs/bosses are moulded into the bottom of the enclosure to mount your PCB.  
• Use our connecting wires/cables in and out of the enclosure using our CABLE GLANDS. 

Applications:

·        Electronics Products Housings,

·        Electrical Products Housings

·        Water level controllers Housings,

·        LED Drivers Housings,

·        General Purpose Housings,

·        Stabilizer Housings,

·        Electronic Choke Housings,

·        Motor Starter Housings,

·        Water Proof Housings(IP-65),

·        Junction Box Housings,

·        Mantra Housings,

·        AC/DC Adapter Housings,

·        Power Supply Housings,

·        LED Light Housings,

·        Etc..,

We are one of the leading manufacturers and suppliers of high quality of Industrial Water Proof Enclosure IP-65-21 TR. These flame proof cabinets are manufactured using optimum quality plastics that are sourced from trusted vendors. These products are widely used for the enclosure of various electronic devices and circuits. These products can be customized as per the requirement of our customers. These shock proof cabinets are offered at standards market prices.

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-01(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.
SPECIFICATIONS:

• PRODUCT CODE : SPE-309
• DIMESIONS (OUTER): Size in mm :100 x 100 x 60 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

•   Longer service life
•   Fine finishing
•   Dimensional accuracy
•   High illumination
•   Compact design
•   Light weight

Applications:           

                        L

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-02(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.
SPECIFICATIONS:

• PRODUCT CODE : SPE-310
• DIMESIONS (OUTER): Size in mm :100 x 100 x 80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE 
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-10 to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-318
• DIMESIONS (OUTER): Size in mm :250 x 250 x 100 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-14(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-321/322
• DIMESIONS (OUTER): Size in mm :125 x 125 x 80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-20(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-333/334
• DIMESIONS (OUTER): Size in mm :270 x 180 x 100 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-21(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS
 

• PRODUCT CODE : SPE-335/336
• DIMESIONS (OUTER): Size in mm :300 x 300 x 150 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-12 to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-320
• DIMESIONS (OUTER): Size in mm :100 x 100 x 70 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-17(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-327/328
• DIMESIONS (OUTER): Size in mm :175 x 100 x 80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-16(Normal/Transparent) to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.

SPECIFICATIONS:

• PRODUCT CODE : SPE-325/326
• DIMESIONS (OUTER): Size in mm :175 x 100 x 60 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-03 to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.
SPECIFICATIONS

• PRODUCT CODE : SPE-311
• DIMESIONS (OUTER): Size in mm :175 x 100 x 80 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications:           

We offer a wide range high quality of Industrial/Water Proof Enclosure-IP-65-04 to our valuable customers. These products are offered at standard market prices without compromising on our quality.

These products are used for flame proof and shock proof enclosure of various electronic devices and circuits.

These products are fully tested by our team of experts, to ensure high standards of safety and quality. These products are known for their fine finish and dimensional accuracy.

It can be easily modified, cut, and drilled into with simple tools to match customer requirements. It is light and yet quite strong and rugged. Perfect for housing small /medium sized projects.
SPECIFICATIONS:

• PRODUCT CODE : SPE-312
• DIMESIONS (OUTER): Size in mm :150 x 150 x 70 MM(L*B*H) 
• DIMESIONS (INNER):  Reduce 2-3 MM from Outer Dimensions We can Get Inner Dimensions
• AVAILABLE COLOURS : WHITE
• MATERIAL USED: IP-65

Features:

§  Longer service life

§  Fine finishing

§  Dimensional accuracy

§  High illumination

§  Compact design

§  Light weight

Applications: